B125 / B275 / B697 Product Support Guide
Version 2
7/17/06 page 5
Original Paper Feed: 2 output directions (Straight, Top)
Copy Size: Maximum (Metric) 914mm x 3,600mm (3.6M: roll paper)
914mm x 2,000mm (2M) (Bypass feeding)
(Inch) 36” x 142” (roll paper)
36” x 78” (Bypass feeding)
Minimum (Metric) 210mm x 279.4mm (Roll Feeder & Cassette)
210mm x 257mm (Bypass tray)
(Inch) 81/2”x 11”
Paper width 210,297,420,594,841mm
8-1/2”, 11”, 17”, 22”, 30”, 34” or
9”, 12”, 18”, 24”, 30”, 36”
Maximum Paper Length: Default = 3.6m (11.8 ft), no limitation
Longer size by enabling SP mode 5958 = 1 [3.6-6.0m (19.6 ft)] or
2 [3.6m-15m (49.2 ft)]
Limitation for longer size
1) By changing SP mode 5958, maximum output length will be
extended to 6.0m or 15m (with 5.11 firmware). However, this SP
mode is for extending maximum input length at the same time.
2) When printing 3.6 to 15m, the width of paper should be 841mm
or larger and also the paper should be regular paper.
Regarding 3.6 to 15m printing, when printing on paper smaller
than 841mm wide or printing on other than regular paper, it may
cause low level of reproduction, skewing etc.
3) If you change SP mode 5958 at customer site, please explain
this limitation to customers. If it is not explained, unnecessary
service calls may happen.
Copying speed: 60mm/sec.
2 cpm/ppm @ A0/E (SEF)
4 cpm/ppm @ A1/D (LEF)
Output Paper feed: Top (Standard) and Rear (with Roll Feeder/ Table): switch able
Reproduction Ratio: 1: 1
Reduction / Enlargement:
Inch Version
Engineer Architecture
Metric Version
Reduction 25, 32.4, 50, 64.7 % 25, 33. 3, 50, 66.7% 25, 35.4, 50, 70.7%
100% 100 % 100 % 100%
Enlargement 129.4, 200, 258.8,
400 %
133.3, 200, 267, 400 % 141.4, 200, 282.8, 400%
Zoom: 25.0% to 200.0% by 0.1% step
200.2% to 400% by 0.2% step
Image density: Auto 7 steps, Manual 7 steps
Warm Up Time: Less than 2 minutes (23°C, US: 120V)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales