B125 / B275 / B697 Product Support Guide
Version 2
7/17/06 page 4
Mainframe Specifications
(Remarks: SEF: short-edge feed, LEF: long-edge feed)
Technology
Configuration: Desktop
Copying/Printing Process: Electro-photographic printing
Photo-conductor: OPC drum (970mm x 80∅)
Drum Yield: 40K/A1 LEF or D (24Km)
Charge System : Scorotron (corona charge)
Development System: Magnetic brush
Dual component dry toner system
Fusing: Heat and Pressure
Roller Material: Heat roller: Teflon
Pressure roller: Silicone rubber
Cleaning System: Counter Blade
PM Cycle: 5.6 km
Basic Specifications
Resolution: 600dpi
Gray Scale: Scanning 256 levels
Writing 2 levels
Original Feed: Sheet original
Original Set Position: Center
Original Scanning Methods: CIS
Original Scanning Speed: 15-240mm/s
Original Image (scan) Size: Maximum (Metric) 914mm x 3,600mm
(Inch) 36” x 142”
Minimum (Metric) 182mm x 140mm
(Inch) 7”x 5”
Original width 210, 297, 420, 594, 841, 914mm
8-1/2”, 11”, 17”, 22”, 30”, 34” or
9”, 12”, 18”, 24”, 30”, 36”
Max. Original Width: Up to 960mm
Max. Original Length: Default = 3.6m (11.8 ft), no limitation
Longer size by enabling SP mode 5958 = 1 [3.6m-6.0m (19.6 ft)] or
2 [3.6m-15.0m (49.2 ft)]
Limitation for longer size
1) By changing SP mode 5958, maximum input length will be
extended to 6.0m or 15m (with 5.11 firmware). However, this SP
mode is for extending maximum output length at the same time.
2) When printing 3.6 to 15m, the width of paper should be 841mm
or larger and also the paper should be regular paper.
Regarding 3.6 to 15m printing, when printing on paper smaller
than 841mm wide or printing on other than regular paper, it may
cause low level of reproduction, skewing etc.
3) If you change SP mode at customer site, please explain this
limitation to customers. If it is not explained, unnecessary
service calls may happen.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales