Savin RW-470 Clients Manual de usuario Pagina 12

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 20
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 11
B125 / B275 / B697 Product Support Guide
Version 2
7/17/06 page 12
EDP Codes / Option Order Numbers
Product
Code
EDP Code
Lanier
ID #
Item Model Name
B125 / B275 411634 / 412713 479-1502 Model B125 Aficio 240W / A045 / 2400WD / LW310
B641 411641 481-0792 1 Roll Feeder Roll Feeder Type 240A
B642 411643 481-0793 2 Roll Feeder Roll Feeder Type 240B
B662 411728 481-0796 Table Table Type 240
B643 411644 481-0794 Paper Cassette Paper Cassette Type 240
B321 411051 481-0629 Stamp Board Stamp Board Type A
B394 410844 Roll Holder Roll Holder Type A
B663 411727 481-0795 Hard Disk Drive Hard Disk Drive Option Type 240
B690 / B856 411729 / 412709 481-0818 Interface Option Type 240 Interface Option
B697 411737 / 413025 481-0831 Print Controller Printer Controller RW-240
411738 481-0832 Scanner Option RW-240 Scanner Option
411739 481-0833 PS 3 Option RW-240 Postscript Level 3 Compatible
411740 481-0834 CGM Option RW-240CGM Option
413149 481-7132 DWG/DXF/DWF Option RW-240 DWG/DXF/DWF Option
Installation Requirements
Environmental Conditions
Temperature Range:
10°C to 30°C (50°F to 86°F)
Humidity Range: 15% to 90% RH
Ambient Illumination: Less than 1,500 Lux (do not expose the machine directly to light from the sun).
Ventilation: More than 30m
3
/hr/person in the work area
Ambient Dust: Less than 0.10 mg/m
3
If the installation area has air-conditioners or heaters, put the machine in a location that agrees with these
conditions:
1. Where there are no sudden temperature changes from low to high, or high to low.
2. Where it will not be directly exposed to cool air from an air conditioner in the summer.
3. Where it will not be directly exposed to reflected heat from a space heater in the winter.
Do not install the machine in an area filled with gases that can cause corrosion.
Do not install the machine in areas higher than 2,000 m (6,500 ft) above sea level.
Put the machine on a strong and level surface.
Do not install the machine in an area where there are frequent strong vibrations.
Vista de pagina 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Comentarios a estos manuales

Sin comentarios