Savin MLP26 Instrucciones de operaciones descargar pdf (Pagina 101)

Cleaning and Adjusting the Printer

Cleaning the Friction Pad

If the friction pad is dirty, a multi-

feed or a misfeed might occur. In this

case, clean the pad as follows:

Lift the paper tray slightly then

pull it out until it stops, and while

lifting the front side of the tray,

pull it out of the printer.

Place the tray on a flat surface.

When there is paper in the tray,

remove paper.

Wipe the brown part of the fric-

tion pad with a soft damp cloth.

After that, wipe it with a dry cloth

to remove the water.

Important

❒ Do not use chemical cleaner or

organic solvent such as thinner

or benzene.

Load paper into the paper tray

with the print side up. Carefully

slide the paper tray into the print-

er until it stops.

Important

❒ Do not slide the paper tray in

with force. If you do, the front

and side guides might move.

Note

❒ If misfeeds or multi-feeds of pa-

per occur after cleaning the fric-

tion pad, contact your sales or

service representative.

❒ Follow the same procedure to

clean the friction pad of the op-

tional Paper Feed Unit and the

Envelope Feeder Unit.

ZCEY140J

TS3Y250E

ZCEY150J

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 179 180

Sin comentarios

Savin MLP26 Instrucciones de operaciones Pagina 101